Getting Crafty

It is my humble opinion that the sweetest valentine is the one that is home made and what kind of crafty gal would I be if I didn’t have a few suggestions? Well, of course I do!

Is there anything sweeter than home baked goodies? I’m talking about those delectable chocolates, cookies, brownies or whatever your love most desires.

I am particularly fond of making beautiful sugar cookies. You can make them into beautiful bouquets, pile them onto a pretty plate, box them up in colorful tissue and a myriad of other fun things.

Here is my very favorite cookie recipe from cookie diva, Penny McConnell. Because of it’s versatility, it’s a great recipe to use with children and it requires no refrigeration! Needless to say, these would make great holiday gifts or hostess gifts for parties and everyone loved them at my cookie exchange!

Penny’s Butter Cookie Dough

Yield: 3-4 dozen cookies
Temperature: 325 degrees F

2 Cups butter, salted
2 Cups sugar, granulated
2 large eggs
4 Tablespoons pure vanilla
4 Tablespoons Almond (or other flavour) extract
6 Cups flour, all purpose
1 Tablespoon baking powder

1. Preheat oven to 325 degrees. Prepare cookie sheets with kitchen parchment.
2. In mixer bowl, mix butter with sugar until smooth. Remember to just incorporate these ingredients, do not cream until light.
3. Add all liquid ingredients to bowl. This mixture will probably curdle but the finished dough will be just fine.
4. In a separate bowl, mix flour with baking powder.
5. Add the dry ingredients all at once to the mixer bowl and process until heavy dough forms.

This is quite a soft dough so don’t be afraid to use plenty of flour rolling it out, or roll it out on parchment paper and tear away the excess dough. Then just place the parchment on your cookie sheet and pop it straight in the oven. This makes for easy clean-up!

Penny mentioned that if your cookies come out inconsistent then you’re probably not thoroughly mixing your dough. She said your cookies should look almost uncooked with the bottoms being a slightly darker blond. I rolled mine out approximately 1/4 thick and cooked them for 12 minutes a pan.

Stay tuned tomorrow and I’ll let you in on Penny’s Royal Icing and over the next few days I’ll give you some great tips on fun and clever ways to decorate your cookies!

Earlier in the week my classmates and I each found the time to stop by the glass store and choose the glass for our project. It’s amazing how different the same pattern can look when done with different colors and types of glass.

Last week we learned to cut. The glass we learned on was clear window pane style glass, the easiest glass in the world to cut. It has no bumps, no ridges, nothing that would impede your cutter from flowing with ease down your piece of glass.

Last night we made our first cuts into our purchased art glass. Let me tell you, it’s a lot scarier. You’ve paid good money for this glass and if you make too big of a mistake you could find yourself purchasing more!

The method we are using is to place your glass over your pattern, on a light box if necessary, and just cut but there are, of course, many other methods.

We began by numbering the different sections of our pattern and by writing in each an identifier as to which glass we’d be using. That just helps to avoid confusion and it also helps to ensure that you cut all the pieces in one color at the same time, which is more efficient than going back and forth with different colors of glass.

Your first step is to clean your glass. After each segment is cut, we grind it where necessary and then mark it with the corresponding number from the pattern. Additionally we put a dot on the pattern itself to indicate we’d already cut the piece.

Another thing you may want to do is to mark your sheet of glass with an arrow to identify the grain. This is important if you want the grain the same on all pieces within your project. If you window pane will have a front & a back, which it may have if, for example, you’ve added a beveled piece, then you will also want to identify it.

Last night was a bit challenging for me because one of my pieces of glass was slightly warped and kept moving around on the paper.

If you’re fortunate enough to be taking a class to learn leaded stained glass then you’ll probably be provided with your first pattern. If you’re self-teaching then start with something relatively small and easy. It is a good idea, however to do something that has circles and curves and isn’t just squares and rectangles. My instructor talked about how in his first class his project was nothing but straight lines and so for his first year or more of window making he never did anything else because he hadn’t learned how to cut circles and curves. Don’t fall into that rut or you’ll severely limit the types of projects that you can do.

My pattern is very similar to this one only mine is a rectangle:

The rectangular frame gives you the opportunity to learn both straight cuts as well as curved ones.

There are a ton of free resources out there for free patters. Just google for free stained glass patters and a ton of them will come up.

Here are a few to get you started:

Acadian Glass Art - they have some great victorian window pane patterns
Stainedglasspatterns.com
Warner-Crivellaro
Paned Expressions Studio
Chantal’s Stained Glass Patterns
Art:erty - a big collection of patterns for all skill levels

Here is a really cool site that teaches you how to make your own patterns:

Stained-Glass-patterns.org

Whatever you choose, start with something small. Starting with something too big or too complex will only lead to frustration. I’m hoping to graduate to something more ambitious as time goes by. I’d love to do the eyelash window in my parent’s kitchen as this year’s big Christmas gift. Wish me luck!

Probably the most important tool you’ll own with your stained glass hobby is your glass cutter. You can’t exactly use your fingernail, now can you? There are several types of glass cutters on the market and I recommend that you go to a shop and try them out because choosing a glass cutter is very personal and unique to every person. You need a cutter that fits your hand and allows you to cut glass in the easiest way possible

Some examples:

• Pistol Grip - This is my personal favorite and a top seller. It fits nicely in your hand and the cutter is at the perfect angle for glass cutting



• Pencil Grip - As the name suggests, this cutter is pencil shaped. Some folks love this design because it’s more natural for your hands and they feel they can get right down in there close to the glass.



• Fletcher - This is the old fashioned cutter that’s been around forever. It doesn’t hold oil and needs to be dipped in oil before you begin to cut. This is not really an ideal tool for the stained glass hobbyist but for cutting inexpensive glass that you pick up to replace a broken window in a door or something of that nature, then it’s ideal.



• Custom/Thomas Grip - There are a few varieties of this cutter but basically they all have a “saddle” that fits between your thumb and, allowing the fingers to remain straight, relieving them of strain. To fit all hand sizes, the saddle is often adjustable to different heights.

As I mentioned earlier, it’s important to go to a shop that will allow you to try out different cutter so that you can find one that works best for you!

As with any new craft, this one will require some tools. Here is a list of basic tools you’ll need:

• Safety Glasses - Always protect your eyes!
• Glass cutter - We’ll talk on this more later.
• Running Pliers - Running Pliers place pressure evenly on a score line to start and then to run a break in your glass.
• Grozing/Breaking Pliers - dual purpose pliers with a flat jaw and a curved jaw. Both jaws are serrated for removing flares and tiny points of glass
• Fine point black Sharpie - For marking your pattern and for marking your glass.
• Cork backed ruler - the cork will help keep it from sliding around on your glass
• Glass cutter oil - Don’t overfill your cutter. They have a tendency to leak and the more you have in your cutter, the more you have to leak.
• Bench brush - the clean your workspace.
• Glass - The choices are astounding.
• Pattern - Start with something easy. There are lots of free patterns out there.

Nice to haves:

• Waffle Grid cutting matt - this is a nice hard surface to cut on but it won’t scratch your glass. Small glass fragments fall into the grid and you can easily pick it up and tip it into the garbage. This is very handy!
• Glass grinder - One of these will make your life so much easier but proper cutting can help you avoid the need to have one. Less important with lead than with copper foil as lead does not require you to be quite as precise. Use this tool with the curved side down.

Please keep in mind that I am no expert. I’m learning and I’m taking you along for the journey.

Next post I’ll talk about the various types of cutters. Stay tuned!

As I mentioned in my last post, I’ve just started a new stained glass class. For those of you who’ve never done stained glass there are basically three styles for creating stained glass art:

Lead - Glass pieces are cut and fit together through channels of lead known as caming. These pieces are then soldered together, framed and cemented. Lead is most often used in projects needing greater strength or waterproofing such as windows.

Copper Foil - The copper foil method was made popular by L. C. Tiffany at the turn of the century. With copper foil your cuts need to be more precise than with lead. After cutting and grinding your pieces are wrapped in copper foil which provides something for the solder to adhere to. The copper foil method is most often used in lamps and other projects requiring intricate detail.

Dalle de Verre - Also known as faceted glass, dalle de verre literally means “slabs of glass” and is a very thick glass first used as an art medium by the Byzantines. These thick slabs of glass can be scored and etched and are most often seen as walls in churches. The faceting of the glass and the reflections it gives off with light give the illusion of precious gems.

The method I am familiar with is copper foil but I’ve always wanted to learn lead and that is exactly what my new class will teach. I’m fortunate enough to be in a very small class of only 4 students which means that I will get a lot of personal attention. We are going to start off doing a small class project of a Victorian window. This week I will spend some time deciding what glass I want to use and next Monday I start to cut. I look forward to sharing the things I learn with you.

Hi, my name is Kyla and I am the new writer for this blog. I am very excited to get the opportunity to write about crafts. I inherited my love of crafts from my mother who taught me and my brothers how to make a lot of things as children. We did leather tooling, drawing, painting, sewing, needlepoint and ceramics, just to name a few. I carried that love of crafts into my adulthood and am forever taking a class in one thing or another. In fact I just started a stained glass class tonight with a wonderful local glass store here in Austin, Tx, Blue Moon Glassworks. I’ve taken several glass beadmaking (or lampwork) classes from them in the past but this is my first stained glass class.

In addition to the stained glass, my other passion right now is cake decorating and sugar arts. I’m the President Elect for Capital Confectioners of Austin. Each year we hold a big cake show in February. This year’s show will take place from Freb 28- Mar 1st and will have around 300 cakes and 3000 attendees. We have some amazing artists lined up. We have Debbie Brown coming in from the UK. Debbie is the most prolific writer of cake decorating books in the UK. We also have Nick Lodge coming, who is British but he lives in Georgia and Elisa Strauss from Confetti Cakes as well as Jacquy Pfeiffer, the founder of the Chicago. It’s going to be an amazing show! Visit out website at www.thattakesthecake.org.

I’m interested in all kinds of crafts so please feel free to share your passions with me!